Daimler Freightliner Cascadia 2021 - Dash-Mounted and Sleeper-Control Light Switches; High-Beam Headlights; Intelligent High-Beam Headlights; Marker Lights

High-Beam Headlights
With the low-beam headlights on, push the turn-
signal lever away from you to turn on the high-beam
headlights. See
Fig. 4.5. To turn off the high-beam
headlights, pull the lever to the middle position.
With the low-beam headlights on, pull the lever to-
wards you to flash the high-beam headlights momen-
tarily.
When the high-beam headlights are on, a blue tell-
tale illuminates on the instrument cluster.
NOTE: The ignition switch must be on for the
high beams to work.
Intelligent High-Beam Headlights
The intelligent high-beam headlight feature activates
when the headlight switch is in the ’A’ position and
the turn signal lever is pushed away from the driver
in the high-beam position. See
Fig. 4.2 and Fig. 4.5.
When a vehicle approaches from the opposite direc-
tion, the high-beam headlights deactivate and the
low-beam headlights activate. The high-beam head-
lights activate again when there are no vehicles ap-
proaching from the opposite direction.
Marker Lights
To turn the marker lights on, turn the headlight switch
clockwise past the off position. See Fig. 4.2.
AMBT
LIGHT
ALL
DOME
TRLR
LIGHT
WORK
LIGHT
FOOT
WELL
UTLY
LIGHT
DASH
LIGHT
DRL
OFF
SLPR
DOME
AUX
HIGH
DOME
LIGHT
04/18/2016 f611404
1 2 3 4 5 6
7 8 9 10 11
1. Utility Light Switch
2. Dash Light Switch (optional)
3. DRL Override Switch
4. Sleeper Dome Light Switch
5. Auxiliary High Beam Light Switch
6. Cab Dome Light Switch
7. Sleeper Ambient Light Switch
8. All Dome Lights Switch
9. Trailer Utility Light Switch
10. Utility Light Switch
11. Foot Well Light Switch
Fig. 4.3, Dash-Mounted and Sleeper-Control Light Switches
03/09/2016 f611340
Fig. 4.4, Hazard Warning Switch
Driver Controls
4.3