IMPORTANT: Make sure that both hood hold-
down latches are fully engaged before operating
the vehicle.
Remote Keyless Entry
Keyless Fob Use
DANGER
If the button cell battery in this key fob is swal-
lowed, it can cause severe internal burns within
two hours and can lead to death. If you think a
battery might have been swallowed or otherwise
placed inside a body, seek immediate medical at-
tention.
Keep the key fob and batteries away from chil-
dren. Always safely dispose of used batteries. If
the battery compartment does not close securely,
stop using the key fob.
Keyless entry is optional on New Cascadia vehicles.
The remote entry key fob can be used to remotely
unlock and lock the doors, move down the door win-
dows, and start and end the pre-trip light check. See
Fig. 2.9.
•
To unlock both doors, press the unlock button.
•
To lock both doors, press the lock button.
•
To move down the door windows, press the
unlock button for three seconds.
•
To start or end the pre-trip light check, press
the lamp check button.
Key Fob Programming
A maximum of four fobs can be programmed to work
on one vehicle. Whenever a new fob is needed, all
existing fobs must be reprogrammed at the same
time. Any existing fobs that were previously pro-
grammed will no longer work on the vehicle unless
they are all reprogrammed at the same time.
To have the key fobs programmed, take the vehicle
to an authorized Freightliner dealer or service facility.
Specifications
This feature consists of a remote keyless entry that
uses a radio frequency link for communication be-
tween the fob and the vehicle.
f546880a10/23/2019
3
2
1
1. Lock Button
2. Unlock Button
3. Lamp Check Button
Fig. 2.9, Key Fob
Vehicle Access
2.6
To Next Page
Loading...