Datalogic DS8110 User Manual

DS8110 REFERENCE MANUAL
118
4
Field Name
Action/Definition
Aux (Input 3)
Echo
Select Disable or Enable from the drop-down list. If enabled, the Scanner Master or
SC5000 Controller Input 3 status is echoed to the Ethernet Client via bit 2 in Byte
InputBits of the DL_InputStruct.
Phase Echo
This parameter is configurable only if Start Input from Bus is enabled.
Select Disable or Enable from the drop-down list. If enabled, the Reading Phase
status is echoed to the Ethernet Client via bit 7 in Byte InputBits of the
DL_InputStruct.
ASI Object: On-Demand Options
NOTE: Contact Datalogic Support for information on setting up ASI Objects
(legacy Accu-Sort Devices). See Support Through the Website.
PLC IP Address
Enter the IP Address for the PLC Controller (Rockwell Automation: Allen-Bradley
Controllogix or CompactLogix).
Tag Name
Enter a tag name (up to 40 characters) in the field provided.
PLC Slot
Number
Enter the PLC Slot number in the field provided. This corresponds to the physical
slot used on the PLC.

Datalogic DS8110 Specifications

General

Brand	Datalogic
Model	DS8110
Category	Barcode Reader
Language	English