Datalogic Magellan 800i Product Reference Guide

Enter/Exit Programming Mode Code 128
92 Magellan™ 800i Scanner
Code 128 Conversion to Code 39
Enables/disables expansion of Code 128 labels to Code 39. When enabled, the
label identifier for a Code128 label shall be set to Code 39 and all Code 39 for-
matting control shall be applied
to the label.
069600(CR)
Disable
DEFAULT
Enable
069601(CR)
Code 128 Stitching
Enables/disables stitching for Code 128 labels. When parts of a Code 128 bar
code are presented to the scanner with this feature enabled, the bar code parts
will be assembled by the scanner’s software, and the data will be decoded if all
bar code proofing requirements are met.
06A800(CR)
Disable Code 128 Stitching
Enable Code 128 Stitching
DEFAULT
06A801(CR)

Datalogic Magellan 800i Specifications

General

Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417
Tilt reading angle	0 - 360 °
Optical sensor resolution	752 pixels
Light levels (direct sunlight)	0 - 86000 lx
Bluetooth	No
Cable length	2 m
Standard interfaces	USB
Input voltage	5 V
Power consumption	350 mA
Dimensions (WxDxH)	76 x 109 x 151 mm
Certification	China RoHS EU RoHS
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	306.2 g