Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 13
LED and Beeper Indicators
Power On Alert
Disables or enables the indication (a single beep) that the scanner has finished
all its power up tests and is now ready for operation.
Disable
020700(CR)
020701(CR)
Enable
DEFAULT
ERI Active State High
This setting specifies the active-state polarity of the External Read Indicator
signal to High; the inactive state is the opposite polarity.
ERI Active State = Low
00F900(CR)
00F901(CR)
ERI Active State = High
DEFAULT