Datalogic Magellan 800i

Enter/Exit Programming Mode EAN-13
66 Magellan™ 800i Scanner
EAN-13
The following options apply to the EAN-13 symbology.
Disable/Enable EAN-13
Enables/disables ability of scanner to decode EAN/JAN13 labels.
02D300(CR)
Disable EAN-13
Enable EAN-13
DEFAULT
02D301(CR)
Check Digit Transmission
Enable this option to transmit the check digit along with EAN-13 bar code data.
00B900(CR)
Don’t Send Check Digit
Send Check Digit
DEFAULT
00B901(CR)
EAN-13 Flag 1 Character
Enables/disables transmission of an EAN/JAN13 Flag1 character.
024400(CR)
Don’t Transmit EAN-13 Flag 1 Char
Transmit EAN-13 Flag 1 Char
DEFAULT
024401(CR)