Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 44
Control Characters
Affects suffix and prefix characters. When disabled, only ASCII characters
between 20H and 127H inclusive (space... delete) plus special characters 0DH
(carriage return), 08H (backspace), 27H (ESC), 09H (right tab) and 0BH (left tab)
are transmitted.
Choices are:
• Disable Control Characters
• Enable transmission of control cha
racters to host
• Send characters between 00H and 1FH ac
cording to a special function-key
mapping table. (This is used to send keys that are not in the normal ASCII
set; a unique set is provided for each available scancode set. Reference
Appendix E, USB Keyboard Function Key Mappings.)
02C500(CR)
Disable Control Characters
DEFAULT
Enable Transmission of Control Characters
02C501(CR)
02C502(CR)
Enable Function Key Mapping