Datalogic Magellan 800i

Enter/Exit Programming Mode MSI/Plessey
108 Magellan™ 800i Scanner
MSI/Plessey Stitching
Enables/disables stitching for MSI/Plessey bar codes. When parts of an MSI/
Plessey label are presented to the scanner with this feature enabled, the bar
code parts will be assembled by the scanner’s software, and the data will be
decoded if all bar code proofing requirements are met.
NOTE
050000(CR)
Disable MSI/Plessey Stitching
DEFAULT
Enable MSI/Plessey Stitching
050001(CR)
Only functions when Fixed Length Decoding is
enabled.
Minimum Reads
This feature specifies the minimum number of consecutive times an MSI/
Plessey label must be decoded before it is accepted as good read.
00BF01(CR)
Minimum = 1 Read
DEFAULT
Minimum = 2 Reads
00BF02(CR)
00BF03(CR)
Minimum = 3 Reads
Minimum = 4 Reads
00BF04(CR)