Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 113
Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum le
ngth.
035900(CR)
Variable Length Decoding
DEFAULT
Fixed Length Decoding
035901(CR)
Code 11 Length 1, Length 2 Programming Instructions
See page 136for detailed instructions on setting this feature.
NOTE
0344CR)
DEFAULT SETTING FOR THIS FEATURE: 04
Set Length 1
Set Length 2
0345(CR)
DEFAULT SETTING FOR THIS FEATURE: 32
For Code 39 bar codes, all check, data and full
ASCII shift characters are included in the
length calculations. Start/Stop characters are
not included.