Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 101
Start/Stop Character Transmission
The transmission of start and end characters of Codabar is selected below.
009300(CR)
Disable Start/Stop Char Transmission
Enable Start/Stop Char Transmission
DEFAULT
009301(CR)
Start/Stop Character Match
This feature enables/disables the requirement that start and stop characters
match
.
023200(CR)
Disable Start/Stop Char Match
DEFAULT
Enable Start/Stop Char Match
023201(CR)
Codabar Stitching
Enables/disables stitching for Codabar labels. When parts of a Codabar label
are presented to the scanner with this feature enabled, the bar code parts will
be assembled by the scanner’s software, and the data will be decoded if all bar
code proofing requirements are met.
NOTE
06AD00(CR)
Disable Codabar Stitching
DEFAULT
Enable Codabar Stitching
06AD01(CR)
Only functions when Fixed Length Decoding is
enabled.