Datalogic Magellan 800i

Enter/Exit Programming Mode 2D Symbologies
130 Magellan™ 800i Scanner
Disable/Enable GS1 DataBar Limited 2D Component
When enabled, if a GS1 DataBar Limited label is decoded which has the 2D link-
age flag set, the 2D component must also be decoded or the base label will be
discarded.
When disabled, only the GS1 DataBar Limited base label will be decoded and
transmitted regardless of the state of the linkage flag.
Disable GS1 DataBar Limited 2D Component
DEFAULT
Enable GS1 DataBar Limited 2D Component
035800(CR)
035801(CR)