Datalogic Magellan 800i Product Reference Guide

Enter/Exit Programming Mode Codabar
98 Magellan™ 800i Scanner
Check Character Verification
When enabled, the scanner will verify the check character of the labels. When
disabled, any check characters in a label are treated as data characters
007100(CR)
Disable Check Char Verification
DEFAULT
Enable Check Char Verification
007101(CR)
Check Character Transmit
Enable this option to transmit the check character with scanned bar code data.
Applies when the feature Check Character Verification on page 5-98 is enabled.
008C00(CR)
Disable Check Char Transmission
Enable Check Char Transmission
DEFAULT
008C01(CR)

Datalogic Magellan 800i Specifications

General

Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417
Tilt reading angle	0 - 360 °
Optical sensor resolution	752 pixels
Light levels (direct sunlight)	0 - 86000 lx
Bluetooth	No
Cable length	2 m
Standard interfaces	USB
Input voltage	5 V
Power consumption	350 mA
Dimensions (WxDxH)	76 x 109 x 151 mm
Certification	China RoHS EU RoHS
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	306.2 g