Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 33
Intercharacter Delay
Specifies a delay between the end of one character and the beginning of the
next in 10-millisecond increments. This delay is inserted after each data char-
acter transmitted. If the transmission spe
ed is too high, the system may not be
able to receive all characters. You may need to adjust the delay to make the
system work properly.
009C00(CR)
Inter-Char Delay = No Delay
DEFAULT
Interchar Delay = 10 msec
009C01(CR)
009C02(CR)
Interchar Delay = 20 msec
Interchar Delay = 30 msec
009C03(CR)
009C04(CR)
Interchar Delay = 40 msec
Interchar Delay = 50 msec
009C05(CR)
009C06(CR)
Interchar Delay = 60 msec
Interchar Delay = 70 msec
009C07(CR)