Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 95
Check Digit Transmit
Enable this option to transmit the check digit with scanned bar code data.
Applies when the feature Check Digit Calculation on page 5-94 is enabled.
008B00(CR)
Disable Check Digit Calculation
Enable Check Digit Calculation
DEFAULT
008B01(CR)
Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum le
ngth.
022B00(CR)
Variable Length Decoding
DEFAULT
Fixed Length Decoding
022B01(CR)