Enter/Exit Programming Mode
Product Reference Guide
91
Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable lengths 1 and 2.
Variable Length Decoding
DEFAULT
Fixed Length Decoding
Code 128 Length 1, Length 2 Programming Instructions
See page 136for detailed instructions on setting this feature
NOTE
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50
For Code 128 bar codes, only the data
characters are included in the length
calculations.