Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 109
Standard 2 of 5
The following options apply to the Standard 2 of 5 symbology.
Disable/Enable Standard 2 of 5
When this feature is disabled, the scanner will not read Standard 2 of 5 bar
codes.
049400(CR)
Disable Std 2 of 5
DEFAULT
Enable Std 2 of 5
049401(CR)
Check Digit Verification
When enabled, the scanner will verify the check digit of the labels.
049600(CR)
Disable Check Digit Verification
DEFAULT
Enable Check Digit Verification
049601(CR)
Check Digit Transmit
When this option is enabled, the scanner will transmit the check digit. Applies
when the feature Check Digit Verification on page 5-109 is enabled
049B00(CR)
Disable Check Digit Transmission
Enable Check Digit Transmission
DEFAULT
049B01(CR)