Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 87
Code 39 Stitching
Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar
code are presented to the scanner with this feature enabled, the bar code parts
will be assembled by the scanner’s software, and the data will be decoded if all
bar code proofing requirements are met.
00D100(CR)
Disable Code 39 Stitching
Enable Code 39 Stitching
DEFAULT
00D101(CR)
Minimum Reads
This feature specifies the minimum number of consecutive times a Code 39
label must be decoded before it is accepted as good read.
006B01(CR)
Minimum = 1 Read
DEFAULT
Minimum = 2 Reads
006B02(CR)
006B03(CR)
Minimum = 3 Reads
Minimum = 4 Reads
006B04(CR)