Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 81
GS1 DataBar Limited
The following options apply to the GS1 DataBar Limited symbology.
Disable/Enable GS1 DataBar Limited
When this feature is disabled, the scanner will not read GS1 DataBar Limited bar
codes.
035400(CR)
Disable GS1 DataBar Limited
DEFAULT
Enable GS1 DataBar Limited
035401(CR)
GS1-128 Emulation
When enabled, GS1 DataBar Limited bar codes will be translated to the GS1-128
label data format.
036300(CR)
Disable GS1-128 Emulation
DEFAULT
Enable GS1-128 Emulation
036301(CR)