Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 99
Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum le
ngth.
023300(CR)
Variable Length Decoding
DEFAULT
Fixed Length Decoding
023301(CR)
Codabar Length 1, Length 2 Programming Instructions
See page 136for detailed instructions on setting this feature.
NOTE
0238(CR)
DEFAULT SETTING FOR THIS FEATURE: 03
Set Length 1
Set Length 2
0239(CR)
DEFAULT SETTING FOR THIS FEATURE: 50
For Codabar bar codes, all start, stop,
check and data characters are included
in the length calculations.