Datalogic Magellan 800i Product Reference Guide

Enter/Exit Programming Mode
Product Reference Guide 73
2-Digit Addons Minimum Reads
This setting configures the minimum number of times a 2-digit addon must
decode before it is marked valid.
Minimum = 2 Reads
DEFAULT
005F02(CR)
005F03(CR)
Minimum = 3 Reads
Minimum = 4 Reads
005F04(CR)
Add Ons- cont.
Enable Optional 5-Digit Add-ons
051101(CR)
051200(CR)
Disable Optional Code 128 Add-ons
DEFAULT
Enable Optional Code 128 Add-ons
051201(CR)
NOTE
If a UPC/EAN base label and a P2 addon are both
decoded, the scanner will transmit the base label and
add-on. If a UPC/EAN base label is decoded without an
add-on, the base label will be transmitted without an
add-on.
Please note that conditional add-ons settings are con-
sidered by the scanner before optional add-on settings.

Datalogic Magellan 800i Specifications

General

Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	GS1 DataBar, Aztec Code, Data Matrix, MaxiCode, QR Code, GS1 DataBar Expanded Stacked, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, MicroPDF417, PDF417
Tilt reading angle	0 - 360 °
Optical sensor resolution	752 pixels
Light levels (direct sunlight)	0 - 86000 lx
Bluetooth	No
Cable length	2 m
Standard interfaces	USB
Input voltage	5 V
Power consumption	350 mA
Dimensions (WxDxH)	76 x 109 x 151 mm
Certification	China RoHS EU RoHS
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	306.2 g