Datalogic Magellan 800i

Enter/Exit Programming Mode Interface Features
34 Magellan™ 800i Scanner
Intercharacter Delay — cont.
Software Flow Control
Disables/Enables software control using XON/XOFF characters.
002100(CR)
Disable Software Flow Control
DEFAULT
Enable Software Flow Control
002101(CR)
Beep on ASCII BEL
Enables/disables ability of scanner to beep (sound a good read tone) on receiv-
ing an ASCII BEL (07 hex).
069D00(CR)
Disable Beep on ASCII BEL
DEFAULT
Enable Beep on ASCII BEL
069D01(CR)
Interchar Delay = 80 msec
Interchar Delay = 90 msec
009C08(CR)
009C09(CR)