Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 83
Code 39
The following options apply to the Code 39 symbology.
Disable/Enable Code 39
When this feature is disabled, the scanner will not read Code 39 bar codes.
008E00(CR)
Disable Code 39
Enable Code 39
DEFAULT
008E01(CR)
Check Character Calculation
When enabled, the scanner will calculate the check character of the labels. Turn
this option on only when a checksum is present in the Code 39 labels. When
disabled, any check character in the label is treated as a data character
.
005500(CR)
Disable Check Char Calculation
DEFAULT
Enable Check Char Calculation
005501(CR)