Datalogic Magellan 800i

Enter/Exit Programming Mode Label ID
50 Magellan™ 800i Scanner
Label ID
See the <cross-ref>“Label ID” section on page -135 for more information on
setting this feature.
020500(CR)
Label ID Transmission: Disable
Label ID Position: Before bar code Data
DEFAULT
020501(CR)
020502(CR)
Label ID Position: After bar code Data
Set UPC-A Label ID Character(s)
0024(CR)
DEFAULT SETTING FOR THIS FEATURE: A (41 hex)
002D(CR)
DEFAULT SETTING FOR THIS FEATURE: A (41 hex)
Set UPC-A w/P2 Addon Label ID Character(s)
Set UPC-A w/P5 Addon Label ID Character(s)
002E(CR)
DEFAULT SETTING FOR THIS FEATURE: A (41 hex)
0466(CR)
DEFAULT SETTING FOR THIS FEATURE: A (41 hex)
Set UPC-A w/C128 Addon Label ID Character(s)
Set UPC-E Label ID Character(s)
0025(CR)
DEFAULT SETTING FOR THIS FEATURE: E (45 hex)