Datalogic Magellan 800i

Enter/Exit Programming Mode
Product Reference Guide 111
Standard 2 of 5 Stitching
Enables/disables stitching for Standard 2 of 5 bar codes. When parts of a Stan-
dard 2 of 5 label are presented to the scan
ner with this feature enabled, the bar
code parts will be assembled by the scanner’s software, and the data will be
decoded if all bar code proofing requirements are met.
NOTE
059200(CR)
Disable Std 2 of 5 Stitching
DEFAULT
Enable Std 2 of 5 Stitching
059201(CR)
Only functions when Fixed Length Decoding is
enabled.
Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2
of 5 label must be decoded before it is accepted as good read.
049501(CR)
Minimum = 1 Read
DEFAULT
Minimum = 2 Reads
049502(CR)
049503(CR)
Minimum = 3 Reads
Minimum = 4 Reads
049504(CR)