EasyManuals Logo

Datalogic Magellan 9400i User Manual

Datalogic Magellan 9400i
520 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Product Reference Guide 93
Chapter 7
Programming
Introduction to Label Programming
The programming bar code labels contained in this manual will allow you to
customize and configure features and settings for your scanner (scanner/
scale). To ensure full compatibility and proper function, use only the program
-
ming bar codes in this manual and other product-specific publications to pro-
gram scanner features.
This manual has been developed to make it quick and easy for users of all lev-
els to find the information needed to understand and configure features. The
following descriptions will help you to determine where to go from here.
Understanding the Basics
If you have little or no prior experience with programming using bar code
labels, you should review the first few pages of this section to familiarize your
-
self with the basics of scanner programming before performing any changes to
your configuration.
Using a Bar Code Mask
The programming bar codes in this manual have been placed as multiples per
page. In order to present them only one at a time to the scanner, a bar code
mask is provided on the opposite side of this page.
Going Green
Thank you for using the bar code mask on the opposite side of this page. This
manual has been formatted to minimize the quantity of pages needed to pro
-
vide all of the programming bar codes available for this product.

Table of Contents

Other manuals for Datalogic Magellan 9400i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Magellan 9400i and is the answer not in the manual?

Datalogic Magellan 9400i Specifications

General IconGeneral
Standard interfacesUSB
Connectivity technologyWired
TypeBuilt-in bar code reader
Sensor typeLinear
Scanner type1D/2D
Light levels (direct sunlight)0 - 86080 lx
Linear (1D) barcodes supportedGS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage100 - 240 V
Input frequency50 - 60 Hz
Power source typeAC
Power consumption (standby)11 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack, Grey
Housing material-
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth102 mm
Width401 mm
Height130 mm
Weight- g

Related product manuals