Datalogic Magellan 9400i User Manual

Enter/Exit Programming Mode
Product Reference Guide 243
Single Cable RS-232 Options
The RS-232 Single Cable interface shares some configuration options with
other RS-232 interfaces. Rather than repeat them in this section as Single Cable
options, please find them referenced as follows:
"RS-232 Baud Rate" on page 221
"RS-232 Number of Data Bits" on page 223
"RS-232 Number of Stop Bits" on page 224
"RS-232 Parity" on page 225
"RS-232 Software Flow Control" on page 228
"RS-232 Beep After Weigh" on page 233
"Beep on Not on File" on page 234

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g