Datalogic Magellan 9400i User Manual

Scale Features Enter/Exit Programming Mode
Product Reference Guide 171
Scale Interface Options
Specifies various tare and price-weight related scale options.
• Bit 0 = Don't transmit MT8213/MT8217 decimal point
• Bit 1 = Reserved for future use
• Bit 2 = Clear the tare after every weight request
• Bit 3 = Clear the unit price after every price-weight request
• Bit 4 = Consider a zero weight as under the minimum allowable value for
Dialog04 and Dialog06
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Scale Interface Options = default
Scale Interface Options =
Don't transmit MT8213/MT8217 decimal point
Scale Interface Options =
Clear the tare after every weight request
Scale Interface Options =
Clear the unit price after every price-weight request
Scale Interface Options = Consider a zero weight as under
the minimum allowable value for Dialog04 and Dialog06
DEFAULT
041700(CR)
041701(CR)
041704(CR
041708CR)
041710(CR)

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g