EasyManuals Logo

Datalogic Magellan 9400i User Manual

Datalogic Magellan 9400i
520 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
Enter/Exit Programming Mode Interface Related Features
218 Magellan™ 9300i / 9400i Scanners
USB OEM Interface Options
The OEM-USB interface offers specific control over interaction with certain
devices. Options for this feature are as follows:
FULL host interface support — Accepts scanner and scale configuration
host commands.
Compatible with Magellan SL host interface support — Uses Magellan SL
host interface support.
Ignore host interface configuration of scanner and scale — Ignores all
scanner and scale configuration host commands.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
This feature applies only to the USB OEM
interface. For other IBM interfaces, refer to
the feature,
IBM Interface Options on
page 212, earlier in this section.
USB OEM Interface Options = Full Interface Support
USB OEM Interface Options = Compatible with Magellan SL
Host Interface Support
USB OEM Interface Options = Ignore Host Interface
Configuration of Scanner and Scale
055000(CR)
055001(CR)
DEFAULT
055007(CR)

Table of Contents

Other manuals for Datalogic Magellan 9400i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Magellan 9400i and is the answer not in the manual?

Datalogic Magellan 9400i Specifications

General IconGeneral
Standard interfacesUSB
Connectivity technologyWired
TypeBuilt-in bar code reader
Sensor typeLinear
Scanner type1D/2D
Light levels (direct sunlight)0 - 86080 lx
Linear (1D) barcodes supportedGS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage100 - 240 V
Input frequency50 - 60 Hz
Power source typeAC
Power consumption (standby)11 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack, Grey
Housing material-
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth102 mm
Width401 mm
Height130 mm
Weight- g

Related product manuals