Datalogic Magellan 9400i User Manual

Scanning Features Enter/Exit Programming Mode
Product Reference Guide 133
Digital Watermark (DWM) 2D Time
This feature specified the maximum time for 2D digital watermark decoder to
process an image
• Digital Watermark Decoder Timeout = .04 seconds
• Digital Watermark Decoder Timeout = .1 seconds
• Digital Watermark Decoder Timeout = .25 seconds
• Digital Watermark Decoder Timeout = .5 seconds
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
The Digital Watermark feature must be enabled for decode func-
tionality.
Digital Watermark Decoder Timeout = .04 seconds
Digital Watermark Decoder Timeout = .1 seconds
Digital Watermark Decoder Timeout = .25 seconds
Digital Watermark Decoder Timeout = .5 seconds
DEFAULT
04910028(CR)
04910064(CR)
049100FA(CR)
049101F4(CR)

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g