Datalogic Magellan 9400i User Manual

Enter/Exit Programming Mode
Product Reference Guide 435
Micro PDF 417 128 Emulation
This feature specifies which AIM ID to use for Micro PDF 417 labels when per-
forming Code 128 or EAN 128 emulation.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below for the desired setting. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Micro PDF 417 128 Emulation = Micro PDF AIM ID and label
type when emulating EAN128 or Code 128
Micro PDF 417 128 Emulation = Code 128 / EAN128 AIM ID
and label type when emulating EAN128 or Code 128
DEFAULT
032700(CR)
032701(CR)

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g