Datalogic Magellan 9400i User Manual

Enter/Exit Programming Mode 1D Symbology Programming
320 Magellan™ 9300i / 9400i Scanners
Price Weight Check
Enables/disables calculation and verification of price/weight check digits.
Applies to all UPC-A and EAN/JAN-13 labels with eligible
1
Number System/First
Character digits.
Options are:
•Disable
• 4-digit price/weight
• 5-digit price/weight
• 4-digit European price/weight
• 5-digit European price/weight
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code representing the desired option below or on the follow-
ing pages. You’ll need to cover any unused bar codes on facing pages to
ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
1. Price Weight Check generally applies to UPC-A labels with a Number System Digit
of 2 and EAN/JAN-13 labels with a First Character of 2. There are a total of six flag
digits corresponding to the six types. Checking applies depending upon which type
is enabled.
Price Weight Check = Disable
Price Weight Check = 4-digit price/weight
Price Weight Check = 5-digit price/weight
DEFAULT
005C00(CR)
005C01(CR)
005C02(CR)

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g