Datalogic Magellan 9400i User Manual

Scale Features Enter/Exit Programming Mode
Product Reference Guide 183
Host Download To Handheld
Attached Datalogic handheld scanners can be updated via the host port. Con-
tact Technical Support for details.
Handheld Host Download Timeout
This feature sets the timeout (in seconds) to wait for a response from the hand-
held when performing a host download to the handheld.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below, Set Handheld HDL Timeout. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the scan
-
ner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Keypad in Appendix C that represent
the desired delay. The selectable range is 0-255, which is the delay in 1-
second increments. Pad all single and double digit numbers with leading
zeroes to yield a three-digit entry (000-255).
4. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Examples:
002 = 2 seconds
005 = 5 seconds
015 = 15 seconds
Set Handheld HDL Timeout
Default setting for this feature is: 15 seconds
04EF(CR)
DEFAULT

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g