2 Magellan™ 9300i / 9400i Scanners
Appendix C, Keypad, furnishes bar codes representing the digits and characters
required to enter extended programming data needed during certain program-
ming sessions.
Appendix E, Host Commands, contains a partial listing of available host com-
mands that can be used with a compatible host interface.
Appendix F, Factory Defaults, provides a listing of factory default settings
based on the most common interface.
Appendix G, Handheld Data Format Requirements, specifies additional refer-
ences for use when a handheld scanner is connected to the scanner.
How to Use This Manual
You’ll find it helpful to familiarize yourself with the first section of this manual,
since it provides both a general description of the product’s features and an
overview of the manual’s contents and organization. Reference the other sec
-
tions as required for information about scanner or scanning-scale installation,
operation, maintenance, calibration and bar code programming.
Manual Conventions
‘NOTE’ blocks contain information that is helpful and recom-
mended. They provide information that is critical to operations
and/or procedures described in this manual.
‘LEGAL NOTE’ blocks indicate procedures or activities which may
be regulated under law by governmental agencies. It is your
responsibility to ensure compliance with the regulations that gov
-
ern installation of weighing devices.
‘CAUTION’ blocks inform you that proper handling (adherence to
the procedures described) is required to avoid damage to equip
-
ment and/or property.
‘WARNING’ blocks alert you to potential physical harm or injury.
These statements do not include potentially fatal hazards, which
would be designated as ‘DANGER’ blocks. Use of this product does
not warrant the need for a DANGER block.
LEGAL
NOTE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
