Datalogic Magellan 9400i User Manual

86 Magellan™ 9300i / 9400i Scanners
Calibration Verification (Kilograms)
Once you have completed the calibration sequence, you may be required to
perform these step-by-step verification procedures. These procedures follow
the National Institute of Standards and Technology Handbook-44 guidelines for
grocery scale installations. You may be required by state or local law to have
these procedures performed by a certified technician or verified by a proper
official.
These calibration verification procedures cover five (5) different tests:
• Increasing-Load Test · Decreasing-Load Test
•Shift Test · Return to Zero Text
• Blanking Test
NOTE
If the scale fails any of these tests, go to the topic Scale Error
Reporting in Section 5, Problem Isolation, of this manual.

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g