EasyManuals Logo

Datalogic Magellan 9400i User Manual

Datalogic Magellan 9400i
520 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #275 background imageLoading...
Page #275 background image
Enter/Exit Programming Mode
Product Reference Guide
263
USB Keyboard and Keyboard Wedge Caps Lock State
This feature specifies the format in which the scanner sends character data.
Selections are:
Caps Lock OFF — Send character data in normal format
Caps Lock ON — Send character data in reverse case
Shift Lock Mode — Send character data in shifted case. This only applies to
Wedge G. For other interfaces, this setting results in a Caps Lock OFF function
-
ality.
Caps Lock Compensation Mode — This only applies to USB Keyboard. For other
interfaces, this setting results in a Caps Lock OFF functionality.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the scan
-
ner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock OFF
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock ON
USB Keyboard and Keyboard Wedge Caps Lock State =
Shift Lock Mode
USB Keyboard and Keyboard Wedge Caps Lock State =
Caps Lock Compensation
DEFAULT
030400(CR)
030401(CR)
030402(CR)
030403(CR)

Table of Contents

Other manuals for Datalogic Magellan 9400i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Datalogic Magellan 9400i and is the answer not in the manual?

Datalogic Magellan 9400i Specifications

General IconGeneral
Standard interfacesUSB
Connectivity technologyWired
TypeBuilt-in bar code reader
Sensor typeLinear
Scanner type1D/2D
Light levels (direct sunlight)0 - 86080 lx
Linear (1D) barcodes supportedGS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supportedAztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage100 - 240 V
Input frequency50 - 60 Hz
Power source typeAC
Power consumption (standby)11 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack, Grey
Housing material-
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth102 mm
Width401 mm
Height130 mm
Weight- g

Related product manuals