Datalogic Magellan 9400i User Manual

496 Magellan™ 9300i / 9400i Scanners
Datalogic Handheld Data Format Requirements
The following sections describe label transmission formats that are typically
observed in factory configurations of Datalogic handheld scanners.
UPC-A
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character ‘A’ - total length including prefix must
be 13
• Example: ‘A060992011187’
UPC-A with 2-Digit Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character ‘A’ - total length including prefix must
be 15
• Example: ‘A06099201118712’
UPC-A with 5-Digit Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character ‘A’ - total length including prefix must
be 18
• Example: ‘A06099201118712345’
UPC-A with Code128 Supplemental
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character ‘A’ - total length including prefix must
be greater or equal to 19 (code 128 supplemental codes are variable
length having a minimum of 2 data characters)
• Characters immediately following base label must be of the form ‘8100’,
‘8101’ or ‘8102’
• Example: ‘A0609920111878100000951’
UPC-E
• Number system must be included in label data
• Check digit must be included in label data and is assumed to be correct
• Prefix must be an ASCII character ‘E’ - total length including prefix must
be 9
• Example: ‘E09988750’

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g