Datalogic Magellan 9400i User Manual

74 Magellan™ 9300i / 9400i Scanners
Figure 44. Problem Isolation: EAS System
DONE
DONE
NO EAS DEACTIVATION
START
Verify programmable
parameters using the
information and barcodes
provided in the Programming
Section. Check EAS options,
and other configurable features.
Call Tech Support.
YES
YES
NO
NO
Does the
EAS Antenna
deactivate
labels
?
Does the
EAS Antenna
deactivate
labels
?
Check all EAS
cable connections.
If possible, retest the
system substituting
known-good EAS cable
and/or controller box.
YES
NO
Does the
EAS Antenna
deactivate
labels
?
Ensure operator has been trained in
proper EAS system use (reference the
topic “Deactivating Security Labels”).

Datalogic Magellan 9400i Specifications

General

Standard interfaces	USB
Connectivity technology	Wired
Type	Built-in bar code reader
Sensor type	Linear
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Housing material	-
Sustainability certificates	RoHS

Weight and Dimensions

Depth	102 mm
Width	401 mm
Height	130 mm
Weight	- g