Datalogic RIDA DBT6400 - Disable All Symbologies; Coupon Control

Enter/Exit Programming Mode Disable All Symbologies
106 RIDA™ DBT6400
Disable All Symbologies
Scan this label to disable all symbologies.
Disable all symbologies
Coupon Control
This feature is used to control the method of processing coupon labels.
Options are:
• Allow all — allow all coupon
bar codes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the Enter/Exit bar
code.
2. Scan either the enable or disable bar code below. You’
ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
sees only the bar code you intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit bar code.
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
DEFAULT
Coupon Control = Enable only GS1 DataBar
$AD
$CCPCL00
$CCPCL01
$CCPCL02