Datalogic RIDA DBT6400 - Configuration Updates; Automatic Configuration Update; Copy Configuration to Scanner; Copy Configuration to Base Station

Wireless Features Enter/Exit Programming Mode
Product Reference Guide 257
CONFIGURATION UPDATES
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically en-
sure they stay in sync with
regard to application hardware and/or configuration.
$CBTCU00(CR)
Automatic Configuration Update = Disable
$CBTCU01(CR)
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the scanner.
py g
Copy Configuration to Scanner
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base Station.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the Base Station.
Copy Configuration to Base Station
Cpycfg2Ba
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.