Enter/Exit Programming Mode China Sensible Code
200 RIDA™ DBT6400
China Sensible Code
Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control
on page 199. Length 1 is the minimum l
abel length if in Variable Length Mode,
or the first fixed length if in Fixed Leng
th Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 248 for detailed instructions on setting this feature.
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/E
XIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
0001 = Length 1 is 1 Character
DEFAULT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
