Datalogic RIDA DBT6400 - Datalogic 2 of 5; Datalogic 2 of 5 Enable;Disable; Datalogic 2 of 5 Check Character Calculation

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 149
Datalogic 2 of 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the scanner will not read Datalogic 2 of 5 bar codes.
DEFAULT
Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Data-
logic 2 of 5 check character.
DEFAULT
Datalogic 2 of 5 Check Character Calculation = Disable
Datalogic 2 of 5 Check Character Calculation = Enable
$CD2EN00
$CD2EN01
$CD2CC00
$CD2CC01