Datalogic RIDA DBT6400 - Good Read Speaker Volume

Enter/Exit Programming Mode Audio Jingles
90 RIDA™ DBT6400
Good Read Speaker Volume
Selects the speaker volume (loudness) upon a good read Jingle or beep. There
are three selectable volume levels.
Good Read Speaker Volume = Speaker Off
Good Read Speaker Volume = Low
Good Read Speaker Volume = Medium
Good Read Speaker Volume = High
DEFAULT
WARNING
Depending on the setting of this con
figuration parameter, the operating
time between the charges is reduced.
$CBPVO00
$CBPVO01
$CBPVO02
$CBPVO03