Datalogic RIDA DBT6400 - Docking Beep; Leash Alarm

Wireless Features Enter/Exit Programming Mode
Product Reference Guide 255
Docking Beep
Enables/disables a beep indication when the handheld is placed in the Base Station.
$CBTCB00(CR)
Docking Beep = Disable
$CBTCB01(CR)
Docking Beep = Enable
DEFAULT
Leash Alarm
This setting specifies the number of seconds to sound the Leash Mode beeps (three
per second) when the handheld goes out of range. This is especially useful in instances
where the reader might inadvertently have been placed in a bag or cart.
For this mode to be effective, the reader must be linked to the Base Station or to the
Ho
st. If the reader is asleep or disconnected from the Base Station, there is no way for
it to know where it is relative to the Base Station because communication is not active
between the devices.
DEFAULT
$CBTLB00(CR)
Leash Alarm = Disabled
$CBTLB01(CR)
Leash Alarm = 1 Second
$CBTLB02(CR)
Leash Alarm = 2 Seconds