Enter/Exit Programming Mode LED and Speaker Indicators
80 RIDA™ DBT6400
LED and Speaker Indicators
Power On Alert
Disables or enables the indication (from the Speaker) that the scanner is receiv-
ing power.
Audio Jingles
The scanner can be set up to sound a predefined “Jingle” (a short, user-defined
tune uploaded via Datalogic Aladdin™ configuration software) or traditional
beep sounds to indicate good read and power-up events.
To upload a jingle in Aladdin:
1. Install Datalogic Aladdin™ (v 1.8.0.0.0 or later) on your computer.
2. Connect the scanner you want to program to the computer.
3. Use Device Autodetection to allow Aladdin to search f
or your reader, or
click on Offline Configuration to select the file for your device.
4. After the Configuration screen opens, click on the music icon in the menu
ba
r in the upper right-hand part of the screen:
$CBPPU00
Power On Alert = Disable (No Audible Indication)
$CBPPU01
Power On Alert = Power-up Beep
DEFAULT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
