Symbology Selection Enter/Exit Programming Mode
Product Reference Guide
209
PDF417 Set Length 1
Specifies one of the bar code lengths for PDF417 Length Control on page 208.
Length 1 is the minimum
label length if in Variable Length Mode, or the first
fixed length if in Fixed Length Mode. Length includes the bar code’s data char-
acters only. Characters can be set from 0001 to 2,710 characters (pad with
ze
roes) in increments of 01. Any value greater than 2,710 will be considered to
be 2,710.
See page 248 for detailed instructions on setting this feature.
Select PDF417 Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followe
d by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
0001 = Length 1 is 1 Character
To Next Page
Loading...
Need help?
General
Weight and Dimensions
