Datalogic RIDA DBT6400 - Standard 2 of 5 Check Character Transmission; Standard 2 of 5 Length Control

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 167
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check
character.
Standard 2 of 5 Check Character Transmission = Don’t Send
Standard 2 of 5 Check Character Transmission = Send
DEFAULT
Standard 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Standard 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
Standard 2 of 5 Length Control = Variable Length
Standard 2 of 5 Length Control = Fixed Length
$CS2CT00
$CS2CT01
$CS2LC00
$CS2LC01