Enter/Exit Programming Mode Add-Ons
118 RIDA™ DBT6400
Add-Ons
The following features apply to optional add-ons.
NOTE
Contact Customer Support for advanced programming of
opti
onal and conditional add-ons.
Optional Add-ons
The scanner can be enabled to optionally read the following add-ons (supple-
mentals):
•P2
•P5
NOTE
DEFAULT
Optional Add-Ons = Disable P2
Optional Add-Ons = Enable P2
DEFAULT
Optional Add-Ons = Disable P5
Optional Add-Ons = Enable P5
If a UPC/EAN base label and a an add-on are both decoded, the
scanner will transmit the base label and add-on. If a UPC/EAN
base label is decoded without an add-on, the base label will be
transmitted without an add-on.
Conditional add-on settings (if enab
led) are considered by the
scanner before optional add-on settings.
$CADO200
$CADO201
$CADO500
$CADO501