Datalogic RIDA DBT6400 - Iata; IATA Enable;Disable; IATA Check Character Transmission

Enter/Exit Programming Mode IATA
174 RIDA™ DBT6400
IATA
The following options apply to the IATA symbology.
IATA Enable/Disable
Enables/Disables the ability of the scanner to decode IATA labels.
DEFAULT
IATA = Disable
IATA = Enable
IATA Check Character Transmission
Enables/Disables calculation and verification of an optional Industrial 2 of 5
check character.
IATA Check Character Transmission = Disable
IATA Check Character Transmission = Enable
DEFAULT
$CIAEN00
$CIAEN01
$CIACT00
$CIACT01