Datalogic RIDA DBT6400 - BT SECURITY FEATURES

Enter/Exit Programming Mode
254 RIDA™ DBT6400
Beep Volume
Selects the beeper volume (loudness) of radio-specific beep indications. There are
three selectable volume levels.
$CBTBV00(CR)
Beep Volume = Low
$CBTBV01(CR)
Beep Volume = Medium
$CBTBV02(CR)
Beep Volume = High
DEFAULT
Disconnect Beep
Enables/disables the beep indication that a handheld has become connected or dis-
connected from a Base Station or a Host.
$CBTDB00(CR)
Disconnect Beep = Disable
$CBTDB01(CR)
Disconnect Beep = Enable
DEFAULT