Product Reference Guide
271
Appendix A
Technical Specifications
The table below contains Physical and Performance Characteristics, User Envi-
ronment and Regulatory information.
Table 19. Technical Specifications
Item Description
Electrical Features
Battery Type Li-Ion battery pack.
Typical charge time for full
charge from
auto power off
2,5 hours when placed on Based Station or when Host pow-
ered through the micro USB cable connection
a
a.
Charge times are much lower when battery is within daily typical operating condition.
.
Operating autonomy
(continuous reading)
4000 readings or 5 hour connected to
a Host. (with aggressive
power saving profile).
Max. Scan Rate 60 frames/sec.
Reading Indicators
Side and Top Illumination, Good R
ead Spot, Beep, Jingle or
Viber.
Cradle Consumption and DC
in
put supply range
5V +/- 10%; Power < 8W (b); Max 500mA when in host/bus
powered mode
b
b.
Typical input current measured under factory default configuration.
.
To Next Page
Loading...
